Instructions / Assembly

P.10
RTA-7050
P.10
STEP 15
Screws:
🅐
M6x35mm
2
Pcs
🅑
Φ8
x30
2
Pcs
🅒
ST7x58mm
4
Pcs
1st: Assemble the panel ② to the panels ③ using screws Ⓒ.
2nd: Insert the wooden pins Ⓑ in the corresponding holes on panel ①.
3rd: Insert the bolts Ⓐ in the corresponding holes on panel ①.
3th: Insert and align the cam locks Ⓐ in panel ④.
5th: Assemble panel ④ to panel ① as shown and as explained on page 3.
See page 3
STEP 16
Screws:
🅑
Φ8
x30
4
Pcs
🅒
ST7x58mm
4
Pcs
1st: Insert the wooden pegs Ⓑ in the corresponding holes on panels ④ and ⑤.
2nd: Assemble panel ⑥ to panels ④ and ⑤ using screws Ⓒ.
Make sure to
assemble panel ④
with the cam locks
facing inwards