Instructions / Assembly

P. 8
RTA-7050
P. 8
First insert the dowels B in the innermost holes on panels 9, 10, 11 and
12, then with the help of another person place the bottom panel 8 and
assemble it to the panels using screws C as shown.
STEP 6
Hardware:
B
Φ8x30
8
Pcs
C
ST7x58
8
Pcs
Peel off and adhere the felt covers F on panel 8 as shown. Then with the
help of another person turn the unit it upright.
STEP 7
Hardware:
F
Φ25 (Felt)
6
Pcs
C
B
STEP 8
Hardware:
D
ST3.5x40
4
Pcs
Assemble the drawer back panel 17 to the side panels 15 and 16 using
screws D, then slide in the drawer bottom panel 18 through all the
grooves as shown.
(Bottom)
(Front)
11
12
The groove on
panel 8 go at the
back of the panel.
The grooves go on the
bottom and facing
inwards in all the panels