Instructions / Assembly

P. 7
RTA-7050
P. 7
On the top panel 7 screw the bolts A into the outermost holes and insert
the wooden dowels B in the innermost holes as shown.
STEP 3
Hardware:
A
M6x35
8
Pcs
B
Φ8x30
8
Pcs
With the panels 9, 10, 11 and 12 oriented upside-down, insert and
align the cam locks A into the panels, then slide down the panels over
the bolts and dowels of panel 7, and turn the cam locks to secure all
panels as shown and as explained in page 4.
STEP 4
Hardware:
A
Cam lock
8
Pcs
A
(Front)
B
Bolts: Outermost holes
Dowels: Innermost holes
Refer to page 4
(Front)
(Bottom)
STEP 5
Slide the back panel 13 through the groves of panels 7, 9 and 10.
(Front)
The grooves on
panels 7, 9 and
10 go at the back
of the panels.