Instructions / Assembly

STEPS 1 THROUGH 11 IS FOR THE ASSEMBLY OF THE LOWER SECTION,

WHICH WILL ASSEMBLE UPSIDE-DOWN

P. 6

RTA-7050

P. 6

With the panels 9, 10, 11 and 12 oriented as shown, assemble the “Flat”

sliders 19 on the bottom of the panels using screws E as shown. Please

note the correct holes to use on the sliders and make sure the wheels

face towards the front of the panels.

STEP 2

Hardware:

ST3x14

Pcs

Separate the sliders 19 according to their shape:

- The “L” sliders (for the drawers) will be used until step 10, please set

them aside.

- The "flat" sliders (for inside the unit) are the ones being used in the

next step.

STEP 1

(Top)

(Front)

(Top)

(Front)

Left sliders to panels 9 and 12:

Right sliders to panels 10 and 11:

The groove on

panels 9 and 10

go at the back

of the panels.

Scan QR Code to

view this step