Instructions / Assembly

P. 4
RTA-7050
P. 4
☛
This unit uses cam bolts and locks. The following explains how to use them.
This is not an assembly step; it is a guide for when you are actually doing the
assembly using this kind of hardware.
Cam Bolt Cam Lock
1. Screw the bolt into the
corresponding panel.
2. In the other panel, insert the cam
lock and align it so it can properly
receive the head of the bolt, then
join the panels. There might be a
very small gap between the panels
which is normal.
3. Turn the cam lock clockwise. This
will lock the parts together and will
close any gaps.
Alignment: Point towards
the panel with the bolt.