Instructions / Assembly

P. 1 0
RTA-7050
P. 1 0
STEPS 12 THROUGH 17 ARE FOR THE ASSEMBLY OF THE UPPER SECTION,
WHICH WILL ALSO ASSEMBLE UPSIDE-DOWN
1st: Insert the dowels B in the innermost holes on panel 1 on the center
and right side.
2nd: Insert the bolts A in the outermost holes on panel 1.
3rd: Insert and align the cam locks A in the panels 3.
4th: Assemble the panels 3 to the panel 1 as shown and as explained on
page 4.
Following the same procedures as in step 12, and as explained in page
4, assemble panel 5 to panel 2 with bolts/cam locks A and dowels B as
shown.
(Left side)
(Right side)
Refer to page 4
STEP 12
Hardware:
A
M6x35
4
Sets
B
Φ8x30
4
Pcs
Refer to page 4
(All panels are shown upside-down)
(Bottom side)
(Right side)
STEP 13
Hardware:
A
M6x35
2
Sets
B
Φ8x30
2
Pcs
The cam locks
must go facing
towards the inside