Instruction Manual

58
VIEWING A PROGRAM FILE
Touch Programs And Logs to display Only
Programs.
Search for the required program file and touch it to
highlight it.
Touch View to open the temperature profile (Pre-
run Screen) of the program.
Touch Start to start the program.
Note: It is not possible to send a program to a
connected Satellite unit from the View screen.
Touch Edit to edit the program.
Touch Back to return to the previous screen.
Note: The temperature log will remain blank until the
program has been started.
VIEWING A TEMPERATURE LOG FILE
It is not possible to view a temperature log file on the
TC-PLUS. It must first be copied to a USB memory
stick then viewed on a PC using the Techne
Workbench software, which can be downloaded free
of charge from www.techne.com
See the directions given in the next section for
copying files to a USB memory stick.
Copy the files to a PC and open the Workbench
software.
Use Settings to select the path for the saved files or
click on Open to browse for the saved files.
Select the required temperature log and click Open.
Note: Since the .temperaturelogdata file is a text file,
it can also be opened in applications such as Excel
for further analysis.