User Manual

40
Select the program required, using the cursor
keys to view all the available programs.
Press "Run".
The run screen is then displayed; if the heated
lid is on then the screen will show the
message "Waiting Heated Lid" and the time
until the lid will be ready. It is possible to stop
or pause the program.
If "Stop" is pressed then it is necessary to
confirm that that the program is to be stopped
by pressing "Stop" again.
If pressing "Stop" was an error then pressing
"Continue" will enable the program to
continue from where it was stopped.
If "Pause" was selected then press "Unpause"
to restart the program. The pause function
might be required for a manual hot start.
Program
3 STEP PCR TEMPLATE
Last Modified 01/11/1998 00:00:00
Heated lid 105.0°C
Heated lid before program On
Pause before program Off
Initial denaturation 05m00s 94.0°C
Hot Start Disabled
Number cycles 30
ExitPrintRun
EditDeleteCopy
▼
▼
Select Program
14526 bytes of memory free
b2 STEP PCR TEMPLATE
b3 STEP PCR TEMPLATE
b ICE BUCKET
b LITIGATION 15 DEGREES
bRT PCR TEMPLATE
New Exit
▼
▼
Program
B ACTIN
Waiting Heated Lid 03m40s
PauseStop