User Manual

39
INSERT/DELETE A STEP
Insert a new step
• Touch Insert a new step to insert the next step in
the current stage.
• Edit the new step temperature, hold time and ramp
rate as required.
Delete a step
• To delete a step, touch the step area to highlight it
and then touch Delete .
INSERT/DELETE A PAUSE
Insert a pause
• To insert a pause between stages, touch Insert a
pause .
The hold temperature will be that of the previous step.
The unit will not continue with the remainder of the
program until it is manually un-paused by the user.
Delete a pause
• To delete a pause, touch the pause button to
highlight it and then touch Delete .
Note : To insert a pause between two previously
programmed stages, it is necessary to first delete the
later stages to where the pause is required.
PROGRAM OPTIONS
• Touch this to view the program defaults as set up in
the Settings module.
Any of these parameters can be edited by touching the
appropriate button and will be saved for the current
program only.
• Touch Program to return to the programming
screen.