Instruction Manual

THE DB-2TC DRI-BLOCK
®
The unit has a recessed chamber which can hold up to two interchangeable insert blocks which accept
test tubes or other sample containers. The temperature is set by 3 front panel buttons with digital display.
The DB-TC is supplied with an extraction tool for removing the insert blocks from the unit.
Working temperature range Ambient 0°C to 100°C
Temperature range 0°C to 100°C
Temperature stability @ 37°C ±0.1°C
Temperature setting Push button
Temperature scale graduation No graduation
Temperature display Red LED 4 digit
Uniformity within block at 37°C ±0.1°C
Uniformity within block at 100°C ±0.1°C
Block at maximum temperature 1°C
Display resolution 0.1°C
Set point accuracy ±1°C
Maximum number of blocks 2
Heater power 2 x 150W
Heat up time 30°C to 37°C 6 minutes
Heat up time 30°C to 56°C 14 minutes
Heat up time 30°C to 100°C 19 minutes
Overall size L x W x H (mm) 279 x 260 x 105
Net weight (without blocks) 2.9 kg
Electrical supply
Voltage Frequency Power
230V 50Hz - 60Hz 300W
110V - 120V 50Hz - 60Hz 300W
20
®