Owner's manual

CREATE A NEW PROGRAM

From the Home Screen, touch the

New Program

button. This will open a screen where you can build

a program by adding stages and steps and define

the temperatures and hold times.

INSERT/DELETE A STAGE

A stage is a section of a program that consists of a number of individual steps that can be cycled

(repeated) a defined number of times.

Insert a new stage

• To insert a stage in a program, touch Insert a

new stage. A stage with one step will be

inserted.

Stage 1

• Touch this to give the stage a name (optional).

Enter the name using the text entry screen.

1 cycle

• Touch this to edit the number of cycles

(repeats) for the stage. Enter the required

number of cycles then touch Back.

Temp

• Touch the temperature button to edit the

temperature of the step and add any

increment/decrement or gradient features.

Note: The minimum step temperature that can be

programmed during cycling stages is 10°C. If the

step temperature is above or below the valid

gradient range (

PrimeG only) then the gradient

function is disabled.

Time

• Touch the time button to edit the hold time of

the step and to add any increment/decrement

time features.