Owner's manual

25
The temperature value will now appear orange in the
programming screen indicating that it contains a
modified function.
Note: It is not possible to both increase and decrease
the temperature of the same step.
To enter a temperature gradient
on a step (
3
PrimeG
only):
On the
3
PrimeG an additional Temperature Gradient
button is available.
• Touch the step Temp button to open the temperature
screen.
• Touch Increments and Decrements.
The increment, decrement and gradient screen will
open.
• Touch the button next to the gradient parameter to
turn it ON.
• Next touch the temperature button to set the gradient
range.
A new screen will open which is similar to the simple
temperature entry screen.
• Enter the required value followed by Back.
• If an entered temperature value is invalid, a prompt
will indicate the acceptable range.
• Touch Accept to return to the previous screen.
• Touch OK to accept the modification and return to
the program.
• Touch Cancel to return to the programming screen if
no changes are required.