Operation Manual

ManualsBrandsTechnaxx ManualsAMVideo Watch Actionmaster

Technaxx Video Watch Actionmaster 4GB

User Manual

Please find the Declaration of Conformity for this device under following internet-link:

www.technaxx.de//konformitätserklärung/video_watch_actionmaster_4gb

Charging and low battery status

1. This camera watch has a built-in rechargeable Li-battery which can be

charged by connecting the watch’s USB interface with adapter or computer USB

interface. After connected it, the red light always is ON and blue LED flashes,

state its charging. When the blue LED constantly is ON, it indicates that the

device is fully charged. Then disconnect it.

2. While recording a video or taking pictures, the blue LED flashs quickly when

the battery becomes a low status. The camera turns OFF automaticly. Before the

camera turns OFF, it saves the files.

Buttons

1. Power/Video Button: press and hold the button to turn on/off, press shortly to

record a video

2. Photo Taking Button: press shortly the button to take photo

3. USB interface

4. Camera lens

5. Microphone

6. LED indicator

7. Time setting

RESET: Press down the Power/Video Button (1) together with the Photo Taking

Button (2) at the same time

Summary of content (4 pages)

PAGE 1
Technaxx Video Watch Actionmaster 4GB User Manual Please find the Declaration of Conformity for this device under following internet-link: www.technaxx.de//konformitätserklärung/video_watch_actionmaster_4gb Charging and low battery status 1. This camera watch has a built-in rechargeable Li-battery which can be charged by connecting the watch’s USB interface with adapter or computer USB interface. After connected it, the red light always is ON and blue LED flashes, state its charging.
PAGE 2
Operation Methods 1. Turning camera ON Press and hold down the Power/Video button for two seconds. Both, the red LED and blue LED turn on at the same time. The red LED turns off while the blue LED keeps on shining (it indicates power on and standby time mode). 2. Turning camera OFF In the standby/video mode press and hold down the Power/Video button. The red LED flashes for three times and then turns off. When the camera is not used 3 minutes after powered on, it will power off automatically. 3.
PAGE 3
Installation of the driver 1. For Win98 only installation of an additional driver to the PC is needed (it is on the CD-ROM enclosed in delivery). It comes to effect after restarted the PC. There is no need to install the driver for Windows Vista / XP / ME / 2000 / Mac OS 9.2.2 systems or higher version. 2. Put the CD accessory to the CD-ROM drive to install the PC camera driver (WDV_020_PC-Camera.exe) to the computer. Connection with a computer 1. Use the USB cable to connect it to the PC USB port.
PAGE 4
. Quit USB device: a. Double-click the Windows Interface "Safely Remove Hardware" icon (lower right corner of the green arrow). b. Select "Stop" in "Safely Remove Hardware" dialog box. c. Choose the device to stop, click "OK", device quit safely, "Safely Remove Hardware" dialog box shows ’USB Mass Storage Device can now be safely removed from the system’ in the lower right corner of the green arrow. d. Close "Safely Remove Hardware" dialog box. e. Disconnect the USB device from the computer.