Operation Manual

LAN Settings

Click on “LAN 



 Setup” located at the web management interface,

the following message will be displayed on your web browser:

IP Address:

Enter the IP address of your Router or reset it in

dotted-decimal notation Wireless N Router

(factory default: 192.168.0.1)

Subnet

Mask:

An address code that determines the size of the

network. Normally use 255.255.255.0 as the

subnet mask.

DHCP Type: Enable or Disable

Note:

1) If you change the IP Address of LAN, you must use the new IP

Address to login onto the Router.

2) If the new LAN IP Address you set is not in the same subnet,

the IP Address pool of the DHCP server will change

accordingly at the same timewhile the Virtual Server and DMZ

Host will not take effect until they are re-configured.