Operation Manual

17
WPS: Enable / Disable
WPS Mode 

 PIN: If the new device supports Wi-Fi Protected
Setup and the PIN method, you can add it to the network by PIN.
WPS Mode 

 PBC: If the wireless adapter supports Wi-Fi
Protected Setup and the Push Button Configuration (PBC)
Step 1: Press the WPS button on the Router.
Step 2: Press and hold the WPS button of the adapter directly for 2-
3 seconds.
Step 3: Wait for a while until the next screen appears. Click Finish
to complete the WPS configuration.
Router Administrator Setup
Change management password
Default password of Wireless Router is “admin”, and it’s displayed
on the login prompt when accessed from web browser. There’s a
security risk if you don’t change the default password, since
everyone can see it. This is very important when you have wireless
function enabled.
To change password, please follow the following instructions:
Click on “Admin 

 Password” menu on the web management
interface, the following message will be displayed on your web
browser:
When finished, click on “APPLY”; If you want to keep original
password unchanged, click on “CANCEL”.