Operation Manual

Wireless Base Configuration

Click on “Wireless 



 Basic” located at the web management

interface, the following message will be displayed on your web

browser: You could configure the minimum number of Wireless

settings for communication, such as Network Name (SSID) and

Channel. The Access Point can be set simply with only the

minimum setting items.

Wireless

Enabled

Wireless On/Off

802.11 Mode

Supports 1b/g mixed, 802.11b, 802.11g and

1b/g/n mixed modes.

SSID

Main Service Set Identifier. It’s the “name”

of your wireless network.

Do Not Broadcast

SSID

Select “enable” to enable the device's SSID

to be visible by wireless clients

Channel

This field determines which operating

frequency will be used. The default channel

is set to Auto, so the AP will choose the best

channel automatically. It is not necessary to

change the wireless channel unless you

notice interference problems with another

nearby access point.