Manual

Model: TX-227,TX-230 Article No. 5039,5042, 04/2023

Mount U-profile to balcony railing

⚫ Lay the rubber strip onto the place of the balcony railing where the holder will be

placed. The Rubber strip is to protect the railing.

⚫ Hang the whole solar module onto the balcony railing by help from a second person.

⚫ Now screw in the star screw with an attached Hex nut M8 into the both holes of the

U-profile. The Hex but M8 is for counter.

⚫ Place the plastic shim plate between the star screws and the rubber strip on the

railing.

⚫ Fix the plastic shim plate by gently tightening the star screws.

⚫ Now repeat the procedure for the lower U-profiles.

⚫ Check the pictures below for correct mounting.

⚫ Tighten all star screws and lock them with the M8 hex nut.

Note: Make sure that the bracket at the bottom of the balcony is also mounted and

secured to avoid problems in stormy weather and to ensure that the module cannot

move under any circumstances.