Manual

7
Model: TX-227,TX-230 Article No. 5039,5042, 04/2023
Step 2
Step 3 (only for balcony railing)
Use part C and insert it into the hole of B
and the middle hole of A to mount the
bracket for the 35° angle. Secure part C
with two M8 hex nuts. Tighten the nuts
with a 13 mm wrench.
Tighten the M8 hex nut from Step 1 now
as well.
Attach part D to the top of part B. Secure
part D with two M8 hex nuts. Tighten the
nuts with a 13 mm wrench.
The lower part D can be attached to part
B, but must be detached again when the
mount is hung on the balcony railing.