Manual

Our viewfinder does not have an integrated optical image reversal. In
this case, the image is visible upside down when looking through the
viewfinder. This is not an error!
Observation
Point the telescope at the desired object (e.g. the moon) and look
through the viewfinder. Use the telescope's horizontal and
vertical adjustment to centre the object in the middle of the
viewfinder's hair cross. Look through the eyepiece for an
enlarged view of the object. If necessary, adjust the image
sharpness by turning the focussing wheel. The magnification can
be enhanced by the change from an eyepiece with a high focal
length (e.g. 20mm) to an eyepiece with a lower focal (12.5mm)
length.
Trouble shooting
No Image
Remove the caps, change the eyepiece
Blurry image
Adjust the sharpness by turning the focus wheel.
Bad image
Do not observe through glass, clean lenses
Care and maintenance
Clean the device only with a dry or slightly damp, lint-free cloth. Do not
use abrasive cleaners to clean the device. This device is a high-precision
optical instrument, so in order to avoid damage, please avoid the following
practice: ●Use the device in ultra-high or ultra-low temperature. ●Keep it
or use it in moist environment for long. ●Use it in rainfalls or in water.
●Deliver or use it in strongly shocking environment. ●Avoid fingerprints on
optics
Hints
● The device is intended exclusively for private and not for commercial
use. ●Only use this device as described in this user manual. ●Do not
place any part of this device in water or any other liquid. ● Do not handle
the device with wet hands. ●Prevent it comes into contact with hot
surfaces or high humidity. ●Keep it away from heat sources to avoid
deformation of plastic parts. ●Never take the objective out of its socket
and do not modify its adjustment
Safety Instructions
● Never look through this device directly at or near the sun. There is a