Manual

Product overview

Fixing screw

Handle

Crank screw (adjust height)

Strut

Clamping lever

Rubber foot

Site location

Choose a dark location to avoid an interference of dark adaption

throughout lights. A flat and stable surface is recommended. Do not

observe from closed rooms. Approx. 30 minutes before starting an

observation, position the telescope and the accessories on the

desired location to allow a temperature compensation.

Setting up the tripod

Pull out the tripod legs slowly until the tripod bridge is opend

completely. Open the clamping lever for the tripod legs. Pull out the

tripod legs to the desired height. Make sure that the bubble of the

circular level is in the middle of the circle to ensure a horizontal plane

stand. Close the clamping lever for the tripod legs. Loosen the

locking screw for the height adjustment. Pull out the tripod head to

the desired height. Tighten the locking screw for the height

adjustment by hand.

Mounting the Telescope on the Tripod

Screw the threaded bolt of the tripod head plate into the mounting

connection of the Telescope to attach.

Make sure that the objective lens is pointing to the opposite side of

the handle.

Dew shield

Objective lens

Fixing screw

Holder for finder scope

Eyepiece extension

Eyepiece holder

Focus wheel

Mounting connection

spirit level

Screw

Locking lever