Manual

11
Camera angle adjustment
Put the car in reverse gear to automatically
trigger the display of the image behind the
car. Then adjust the camera angle to the
most suitable position.
Adjustable angle for flexibility: 114°
When rotating the camera hold the license plate holder with one
hand and rotate up or down the outer frame of the camera with the
other hand to set the best angle.
Set the camera at an angle where you have a good view to the rear,
depending on the height of the license plate holder from the ground.
The displayed lines on the monitor give you an indication of the
distance. Definitely control the distance with a folding ruler.
IR LED and photoconductive sensor
The photoconductive sensor next to the camera can detect light
changes in real time, It will automatically light up when reversing at
night or in low light conditions, so that the reversing image is
clearer.
1
7x IR LED
2
Photoconductive sensor