Manual

10
Note:
Look at the back of the
monitor. Check if the
roller cam is facing
inward and the roller
cam is in close contact
with the groove of the
bottom case of the
monitor. The installation
direction is correct.
As shown in the figure,
the monitor is viewed
from the back side. If
the roller cam faces
outward, the installation
direction is wrong.
Choose a right place on the
windshield and mount the
suction cup mount on the
windshield. With the suction
lever in the released position,
press the suction cup against
the windshield. Press the
suction ever toward the
suction cup to lock the mount
To adjust the angle of
monitor, loosen the collar on
the ball joint, retighten in the
desired position.
3. Connect the monitor and cigarette lighter socket with power cord.
4. The monitor is now powered on and will automatically awake
when it will get a signal from the camera (therefore switch into
reverse gear)