Instructions

13
Shut OFF the Car Alarm
If you press the remote control button long (4-5 seconds) you will hear
4x short “beep”.
After that the Car Alarm’s battery is turned off. Not just the PIR sensor
is shut off, the whole Car Alarm is shut off for long time no use or for
transportation.
The Car Alarm can only be activated/armed again when you:
- plug it into the cigarette lighter socket
- connect it via MicroUSB
- as soon as the cigarette lighter socket gives a new charge impuls to
the device if it is still pluged into the cigarette ligther socket.
The remote control and the panic button are not working when device is
shut off.
Change remote control battery
When the remote control does not work anymore, change
the battery (CR2032).
For changing the battery open the remote control. Use a
flat, wide object to remove the rear cover of the remote
control. To do so, insert the corresponding object into the
groove on the top. Now carefully pry open the back cover.
You will now see the circuit board with the battery.
Exchange the battery and close the remote control.
Pair a new remote control
⚫ Open the remote control. Use a flat, wide object to remove the rear
cover of the remote control. To do so, insert the corresponding object
into the groove on the top. Now carefully pry open the back cover. You
will now see the circuit board with the battery.
Shut off does not work when the Car Alarm is connected for charging.
If no battery is inserted, insert a battery (CR2032)