Instructions

14
Reset Settings: [On] / [Off] (default). → Select and press OK button to confirm.
Restore the camera to factory default settings including password, serial number
and so on.
Version: Look up the Firmware information of the camera.
Manually take photos / video, playback: Switch the Mode Button to “Test”. In
this mode, you can take photos, record video and playback files manually.
⚫ Take photos manually: Press Capture button to switch to photo mode. Press
Shot button to take a picture.
⚫ Record video manually: Press Video button to switch to video mode. Press
Shot button to start to record a video clip. Press Shot button again to stop
recording.
⚫ Playback: Press Playback button (17) to enter the playback interface. Press
Up/Down button to scroll through photos or videos. If you want to playback video,
press OK button to play the video. Press OK button again to pause. Press Menu
button to stop playback. Press Playback button (17) again to exit the playback
mode. Under “Playback” press the Menu button for following options:
Delete the current
photo or video
Options: [Cancel] / [Delete]
→ Press OK to confirm
Delete all files
Delete all photo and video
files saved on the memory
card.
Options: [Cancel] / [Delete]
→ Press OK to confirm
Activate slide show
Playback the photos in
slide way.
Each photo display 3 sec.
→ Press OK button to stop playing.
Write protect
Lock the file. It can avoid
accident deletion.
Options: [Write-protect
current file] / [Write-protect
all files] / [Unlock current file]
/ [Unlock all files].
→ Select and press OK button to confirm.