Instructions

Technical specifications
Input voltage (DC)
12V (fixed connection) (10.5-16V)
Permanent current
58A
Input current Max
65A
Output power
600W (maximum, continuously), 1200W (peak)
Output voltage Schuko (AC)
/ AC frequency
230V / 50Hz nominal
Output Waveform
MSW ➢ The power inverter’s MSW [Modified
Sine Wave] is especially suitable for light and
heat with max. 600W.
MSW output can produce "humming" when
connected to audio equipment and is generally
unsuitable for sensitive electronics.
Nominal load efficiency
80%
Low battery voltage
shutdown and alarm
at ~10.5V
USB output ports (DC)
~30Watt (share)
AC output
2x Schuko port
Circuit protection (DC
overload)
2x 35A internal car fuse (replaceable;
suggested by technical)
Weight / Dimensions
1.2 kg / (L) 19.8 x (W) 15.9 x (H) 7.9cm
Package Contents
Car Power Inverter with 2 USB Ports TE19,
2x0.6m connection cable, User Manual
Normal use
The power inverter is intended to convert 12 V direct current voltage to
⚫ alternating current voltage 230 V/50 Hz and/or
⚫ direct current voltage max. 3000 mA (shared)
→The power inverter is only intended for permanent installation.
→This device is not intended for use by children or persons with limited mental
capacity or lacking experience and/or lacking expertise. Children should be
supervised to ensure they do not play with the device.
→This device is not intended for commercial use.