Instructions
ON Mode 
After  turn  ON  the  lamp  light  will  be  activated  automatically  when 
movement is triggered. Light shuts off after 20 seconds if there is no 
more  movement.  If  during  20  seconds  there  is  still  movement  the 
light  will  continue  shining  for  20  seconds.  Light  goes  on  only  in 
darkness to conserve battery life. 
Note 
  Please  fully charge  the  device  before  first  use.    If  there  is no 
good sunlight in 3 months the battery may be out of power. So you 
have  to  charge  it  by  bright  sunlight.    If  the  light  is  blinking  that 
means  the  power  is  very  low.  You  have  to  charge  it  by  sunlight 
otherwise the device will stop working soon.  If there is no good 
sunlight or in winter sunlight especial in North countries it may take 
longer time to fully charge the device. 
WARNINGS  
(To reduce the risk of fire, electrical shock or product damage/failure) 
  Do not  submerge  product in  water (this  unit  is  designed  for 
normal outdoor use).  Keep the device away from fire, water and 
moist places in order to avoid explosion.  Install the solar lamp on 
a  location  where  is  fully  exposed  to  sunlight.    Do  not  expose  to 
extreme  heat.    Make  sure  that  the  solar  panel  on  lamp  is  not 
shaded  by any  objects  or buildings.   Turn  the Switch  in  position 
“ON”  so  that  the  lamp  could  be  charged  in  daytime  and 
automatically works in darkness.  The charging time depends on 
the  sunlight  intensity.    Do  not  install  two  lamps  too  closely 
otherwise the PIR of the lamps will interfere with each other.  Only 
use accessories as recommended in this manual.  No one except 
professional technicians should attempt to disassemble the lamp in 
order to avoid damaging it. 
Hints  for Environment  Protection: Packages  materials  are  raw 
materials  and  can  be  recycled.  Do  not  disposal  old  devices  or 
batteries into the domestic waste. Cleaning: Protect the device from 
contamination  and  pollution.  Avoid  using  rough,  coarse-grained 
materials  or  solvents/aggressive  cleaner. Wipe  the  cleaned  device 
accurately.  Distributor:  Technaxx  Deutschland  GmbH  &  Co.KG, 
Kruppstr. 105, 60388 Frankfurt a.M., Germany 




