Instructions

Installation
 Install the lamp on the height from between 2-4 meters.
 Remove the adjustment screw as on picture a.
 Mark the drill position.
 Drill two holes in the wall or in other mounting surface as on
picture b.
 Insert the dowels in the holes, then screw in the mounting
screws. Note: Before tightening the screws make sure that the
mounting base is in the right position.
 Attach the lamp to the mounting base and put the adjustment
screw back as on picture c.
 Adjust the light to right position as picture d and e.
 Turn ON/OFF the device. Note: the built-in battery can only be
charged if the lamp is in ON modus.