Instructions

NOTE: If your 12V connection has a permanent plus, switch off
the monitor when you leave the vehicle. In a parked car the
temperature can easily rise up very high in direct sunlight. To
avoid damages on the monitor, store it in e.g. the glove
compartment.
Using the cable clamps
The pictures explains how to use the supplied cable clamps.
1. Put the cable from
the car you want to
connect the wireless
transmitter with into
the clamp.
2. Insert the 2nd
cable (red or black
cable of the wireless
transmitter).
3. Close the clamp.
Insert the license plate in the holder
The following drawings show in sequence the insertion of the
license plate.
1. Step
 Slide the license plate into the upper
opening.
 Press the number plate towards
the holder.