Technaxx® * User Manual IP-Security Camera 180° TX-108 Important Hint regarding the User Manuals: All languages of the user manual are on the CD enclosed. The English and German version is also as printed version enclosed. Introduction The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device, to which this user manual belongs, complies with the essential requirements of the standards referred to the Directive RED 2014/53/EU. The Declaration of Conformity you find here: www.
Contents Introduction .................................................................................................... 1 1. Features .................................................................................................... 3 2. Product overview ....................................................................................... 3 3. Quick operation guide ................................................................................ 5 4. How to start (Login/Registration)..................
1.
RESET Button: Using a paper clip to press the reset button for 5 seconds to reset the device.
3. Quick operation guide TX-108 camera can only be configured by iOS or Android APP! Start TX-108 Connect the device with the MicroUSB power adapter to a socket, TX-108 starts automatically. Wait until the green indicator light is flashing. The prompt voice will tell you when ready to start with the configuration via App. To download the App Security Premium from the Appstore or the Playstore search for “Technaxx Security Premium” or scan the QR-code below. [iOS 8.0 or above; Android 4.
App pictures of chapter 4, 5 and 6 are based on Security Premium for iOS and Android in version 3.0.3. 4. How to start (Login/Registration) 4.1 Local mode & Users mode There are Local mode and User mode on the App. Users without a registered account can click “Local” and try this App. Data in Local mode will be stored at local only and cannot be restored. User mode: Data added or grouped by user (e.g. the device), is managed by server, which won’t be lost even to delete all data on the Smartphone.
4.3 Forget Password If you forget the password and needs to get it back, click „Forget password”. Enter the Email address into the user interface and press Confirm. The system sends a confirmation Email, which the user can check via his Email account). 5. How to add a device 5.1 Add Device Login to the App if not already done and go to “My device” interface. Note: Due to the limitation of iOS system, some functions on Android version cannot be reached on iOS version.
4 5 Press on Choose WiFi Connect with the WLAN and the WiFi settings of beginning IPC…. The your Smartphone open. WiFi password/key is 11111111 (8x1), wait until IPC…. WiFi is connected and go back to Security Premium. Android WiFi configuration: 6 Choose the WiFi you want to connect with and enter the WiFi password /key. 4 5 6 Choose the Device-ID of Be connected with your Skip this step. Just for TX-108 you want to WiFi and enter your WiFi iOS user. connect by clicking on it. password/key.
iOS and Android: 7 The TX-108 configuring the connection. 8 9 is Enter a customized WiFi connection is WiFi password for the successful and you can TX-108. You are not name the device. allowed to use number series like e.g. “123” or the words “none” or “admin”. 5.2 Add device when already connected to network This mode is to add the device which is already configured and connected to a network. You just need to add to App no new WiFi configuration. After adding you are able to view the video, etc.
Fill in the device name, username and password for the camera. The password was customized by you while WiFi configuration. The standard username is admin. Click on complete in the top right corner to save the settings. 5.2 & 5.3 Choose 5.2 Manually or with bar Networked devices or code scanning enter the LAN/network scan. Device ID. Fill in device name, username and password. 5.3 Choose the found Device ID, enter a device name, username and password. 5.
5.4 IP/DDNS adding By clicking on networked devices (1) the Input manually interface will open. Here you can click on other adding way (2). Now it is possible to add the TX-108 by IP or DDNS (3). (1) Add device (2) Add by Device ID (3) Add by IP/DDNS Note: Adding the device by IP it is not possible to access the TX-108 from outside your local network (no connection via mobile network 3G/4G/LTE).
The password was customized by you while WiFi configuration. The standard username is admin. Click on complete to save the settings. Note: Using DDNS function you need to: Register to a third party provider (e.g. DynDNS, No-IP, etc.) that provides you a DDNS domain OR your router has a static IP from your internet provider. 6. How to navigate through the App 6.1 My device In the My device Interface you can see all your added devices.
Gesture operation Two fingers touch the screen and move outward to enlarge the image. Two fingers touch the screen and move inward to narrow the image. Single finger double clicks the screen to enlarge or narrow the image. Single finger slides left/right to rotate the image.
Device Setup Clicking on the symbol (top right corner) in the live view. It opens the Device setup below. This interface can differ a little bit depending on the use of iOS or Android. All options are explained below. The ID number of the device. This item cannot be filled Device ID in. Device ID will be automatically configured according (Cloud ID) to device type. Enable/Disable the microphone to listen to audio Audio frequency configuration (is not usableto configure the camera).
Change the pattern of the IR LED to auto, day (IR off) Mode or night (IR on). If you use day or night the IR light will (Infrared LED) be always off/on. With auto it changes automatically if IR LED is needed or not. Time sync Time syncing between Smartphone and camera. Choose time zone Time zone is set automatically. If not, adjust it here. Daylight saving time Enable/disable summertime. Choose country. Enable/disable motion detection alarm.
Available capacity Shows available storage capacity of MicroSD card. Click it to format the MicroSD card. The procedure is about 3-5 minutes and is not blocked by other operation. Note: 64 Format -128GB must be formatted via the App! It could be necessary to format until the App shows MicroSD status: Normal. Modify the password of user admin by filling in new password. Password Blank means no modification. 6.1.2 Playback: Click the button of remote playback in the live view.
6.2 My center (personal area) On this interface users can setup their account and App settings. See the picture above. Add email address, cellphone number or WeChat account to bind and be able to login with. Change the password of your account. Like shown in the picture below. Check screenshot / recording file Check alarm message(have to login first) Enable/disable hard decoding (Android only) Enable/disable if you want to be reminded that you are using 2G/3G/4G mobile network.
Setup interface Personal info (account) interface Description of chapter 7 is based on Security Premium for Windows in version 2.0.3. 7. How to use PC Software Windows (& MAC) Attention: It is not possible to configure the camera with the PC Software! 7.1 Installation Start the Security Premium.exe which you find on the included CD. Or download the file under www.technaxx.de/support . Double click on the Security Premium.exe to start the installation. Choose the language and click on OK.
Now start with choosing the look of the software, classic or modern theme. (It can be changed in the software afterwards, if you do not like the chosen theme.) Best is to use the setup guide, click on Next page. But you can also choose the One-Key-Configuration. It will start the software directly than go to 7.2.
7.3 Open live view To open the live view choose the Live view menu. Select the camera you want to view from the list on the right and double click on the device. The live view will open in the black window which is marked with a red frame. 7.4 Playback recordings Click on playback and to open it. The software will ask to close all currently opened live views (when there are open ones). Accept to close so you can change to the playback interface.
8. FAQs Q1: When adding device by LAN or serial number, it warns “device is not online” or “device is not registered” A1: Make sure the internet connection which the device is using could access to internet normally. Check if the router has opened the DHCP function. If you have changed the network parameters of the device manually, we suggest to press RESET button for 5 seconds and make the device to restore to factory settings.
9. Technical Specifications Camera Colour sensor: 1/4" CMOS (1 MP) Minimum illumination: 0.1 Lux @ (F2.0, AGC ON), 0.01 Lux with 4x IR LED Viewing angle: 180° horizontal, 90° vertical Lens / Shutter: f=1.44mm / 1/50(1/60)s ~1/100000s Signal system PAL/NTSC Day / Night mode: built-in IR-CUT double filter automatic switching Video Video resolution: HD (1280*720) Smooth (640*360), 12fps Video file format: .ts Built-in microphone & speaker Supports MicroSD(HC/XC) cards up to 128GB File size: 4MB/min (32GB = 5.
This product includes software developed by third parties, including software which is released under the GNU General Public License Version 2 (GPL v2). This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11.
(2) To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.