User manual

Caution: The receiver is designed NOT (!) to be water resistant.
Never attempt to immerse the unit in water or any other liquid. This
will damage the unit and void the warranty. If put the receiver into a
waterproof bag, it will impact the signal reception.
Sensor
13
PIR sensor
14
Antenna
15
Stand (180° rotary)
16
Belt jack
17
Power ON button
18
Mounting jack
19
Battery compartment
20
Screw
21
Battery compartment cover
How to power it on
After loading 3x AAA batteries, press the front
button for to power it on, the green LED will blink
for 2s then shut down automatically for power save.
Note: Use a screwdriver or a coin to open/to close
the sensor battery case. Caution: The sensor is designed only to
be IP66 water resistant. Never attempt to immerse the unit in water
or any other liquid. This will damage the unit and void the warranty.