User manual

USB charger function
If the device is powered from a car cigarette lighter socket, you can
connect the USB charger port to your mobile phone with a USB
cable* (*not included). The device now is working as mobile phone
charger. It is also possible to charge other devices via USB.
Note: Maximum output of USB is 2x 1A.
Dual Mode
If you have two car alarms you can handle them with one remote. No
need to take two remotes with you. For example you can store one
car alarm in the luggage compartment and the other car alarm in the
centre console in the front of the car.
But before installing you have to pair both devices with the remote.
That needs to be done by inserting both devices at the same time to
cigarette lighter socket. Now both devices are for 5 seconds in
pairing mode.
In the first 5 seconds press and hold the button on the remote for
pairing both devices with the remote. 4x “beep” will confirm the
pairing. For pairing also look under Get started point 2.
Attention: You cannot pair the devices one after another. It is
necessary to plug the devices in at the same time to use one remote
control.
Change remote control battery
When the remote control does not feedback with acoustic or visual
behavior after pressing the button, change the battery (CR2032).
For changing the battery use a coin to open the battery compartment.
Turn the cover on the backside of the remote control left to open and
right to close. Insert the battery. After inserting you should see the
“plus” pole of the battery. Now close the compartment.