User manual

Charge the product
First time using, plug device in the 12–24V cigarette socket to
power on the device. Charge the device for 3–4hours before using it.
You can also use an external charger* (*not included) to charge the
device.
Note: In some cars the cigarette lighter socket is off power when the
engine of the car is not started. So please start your car to power the
cigarette lighter socket.
Get started
After inserting to the cigartte lighter socket, three operations
will happen at the same time:
1. After inserting the device there is a short "beep". The PIR sensor
is armed.
2. You have to pair the device with the included remote once to be
sure that the remote is only paired with your car alarm. This is only
possible in the first 5 seconds after you plugged the device into the
cigarette lighter socket. Press and hold the button on the remote
while the first 5 seconds until you here 4x “beep”. Now the remote is
paired with your car alarm.
3. The red light of the device inside the dome turns on. It indicates
the battery is charging (Charging current 65mA). The red light will
turn off when the device is fully charged.