User manual

 MIC1 and MIC2 are both MIC knobs.
 MIC1 is with a sound hole at the center. Under usual conditions, use this
knob. It can record the voice synchronously when recording video.
 MIC2 is with a sealing pad and no sound hole. Under bad conditions, use
this knob for waterproof and dustproof. The voice cannot be recorded when
using this knob.
Note:  USB knob also is with sealing pad and no hole. Screw it tightly no
matter what environment, otherwise the USB port or electronic components
will be damaged.  Tighten all waterproof knobs when using.  Check if the
sealing pads are off, if off, use back-up knobs.
FAQ:
Cannot turn on

Check if the watchs power is low: charge the battery.
Cannot upload/download files normally

(a) Check the USB cable
between the watchs USB and the PC, maybe is damaged or not/correct
connected. (b) Check if the driver is installed properly. (c) Check if there is
enough storage space to save the file.
Warnings
 Do not attempt to disassemble the watch, it may result in shortly-circuit or
even damage.  Do not drop or shake the watch. It may cause internal
mechanical damage.  Use it under normal temperature and normal humidity.
 Do not use it directly against strong light, to avoid damage optical watch.
Do not use under high dust density environment, to avoid the lens and other
components stain dust and effect the camera quality.  Do not make its strong
shock, vibration, do not use under high magnetic field.  Keep the watch away
from little children.
Hints for Environment Protection: Packages materials
are raw materials and can be recycled. Do not disposal old
devices or batteries into the domestic waste. Cleaning:
Protect the device from contamination and pollution (use a
clean drapery). Avoid using rough, coarse-grained
materials or solvents/aggressive cleaner. Wipe the
cleaned device accurately. Distributor: Technaxx
Deutschland GmbH & Co.KG, Kruppstr. 105, 60388
Frankfurt a.M., Germany