User manual

6. Reset
If the watch is not operating properly, press the Power/Video button (1) and
the Voice record button (8) at the same time to reset it.
Installation of the WEB camera driver
1. If the WEB cam functions does not work, install the driver. Copy the file onto
your computer. For Windows 7 / 8 / 8.1 / 10 only.
2. Put the CD*** (***included) to the CD-ROM drive to copy the file (amcap2a)
to the computer for using the watch as WEB camera.
Connect to a computer
1. Use the USB cable* (*included) to connect the watch to a PC USB port.
Then a “removable disk” icon occurs on the computer. If the watch is
connected to a PC, it starts to work as a removable disk. Video/Transmit/Copy
can be checked, data can be easily attached and deleted (video, audio, etc.)
and non-music documents can be saved.
2. PC camera function
Connect the watch to a computer. When it shows a removable disk, press
shortly the Power/Video record button (1). Then the PC camera can be used.
3. Set Date stamp and Time stamp
a. Plug in the USB cable to the watch and to a computer.
b. Go to <My Computer> or Computer or Explorer.
c. The camera will be recognized as removable Disk Drive.
d. Edit the text file named <<time>> by double left click on the <time.txt> file.
e. Fill in the current Year.Month.Day. hour:minute:seconds [eg: 2016.11.01
23:59:59 Stamp Mode:Y] (Change ”Y” to “N”, the time stamp will not show up.)
f. Go to the file and save it, then close the file.
g. Power off the watch and restart it. Now it has the current date and time.