User manual

Operation Modes
1. Turning camera ON
Press and hold the Power/Video button (1) for two seconds. The BLUE LED
lights up turns OFF and turns ON again. The BLUE LED is steady ON now (it
indicates power on and standby time mode).
2. Turning camera OFF
In the standby/video mode, press and hold the Power/Video button (1). The
RED and BLUE LEDs turn on at the same time. Then the BLUE LED turns off,
and the RED LED flashes for 3x and turns off, too. When the camera is not
used for 3 minutes after powered on, it will power off automatically.
3. Recording a video
In the standby/video mode press shortly the Power/Video button (1). The
BLUE LED flashes for 3x and then turns off. Video recording starts. Press
shortly press the Power/Video button (1) again to stop the recording. To save
the video file, hold the Power/Video button (1). The RED LED flashes 3x
quickly. Then the camera turns off.
Note:
When storage of the camera is full, the RED and BLUE LEDs flash
quickly. After 5 seconds the camera turns off automatically.
4. Separate Sound recording
In the standby mode press shortly the Sound recording button (8) to start
sound recording. The RED LED flashes 3x and turns off. Then recording
starts. Press the Sound recording button (8) to stop the recording. If the
Power/Video button (1) is press long, the RED LED flashes 3x quickly. Then
the recorded file will be saved, and the camera turns off.
5. Infra Red Mode
Under standby mode, press shortly the IR LED light ON/OFF button (6). The
BLUE LED is steady on, the RED LED flashes 2x and turns off  now infrared
light is enabled. Press shortly the IR LED light ON/OFF button 86). The RED
LED flashes 2x and turns off  then infrared light is closed.