User manual

20
6 My Secure Pro APP
On the main menu choose Alarm. After you have added the Basis Station TX-91 like in
chapter 5.1.1 Connect the Basis Station TX-91 to WIFI and add detector and siren to the
Basis Station you have the following options.
6.1 Basis Station Alarm
6.1.1 Select and set mode (Stay, Away, Custom & Disarm)
Figure 6-1
Stay When you are at home, press “Stay” than the alarm system is disarmed. A
short beep of the Basis Station shows that the mode is activated/ changed.
Away When you leave home, press “Away” the Basis Station starts to beep. After
the last beep the countdown is over and the Alarm system is armed. Now
door contact and PIR-sensor will activate the Basis Station and the Siren.
Custom When you activate “Custom” it is possible to set selected detector as
activated.
You stay e.g. at home and still want to activate all Door/Window contacts.
Then under „Custom“ activate all Door/Window contacts. In this case the
PIR sensors will not trip, and you can move freely in the house/flat, as long
as you do not open any door or window.
Disarm When the alarm system is triggered while you are away or at home and
want to stop the buzzer of Basis Station and siren, press “Disarm”. Now
the alarm system is deactivated.