User manual

Step 3. Follow Figure 4-10, pre-drill two holes on fixed part of door/window frame, and

pre-drill two holes on mobile part of door/window.

Step 4. Face device rear cover with bolt, insert and fasten the screws to fix the front covers.

Figure 4-10

2. Mounting by fixing with double-sided adhesive tape* (*included):

Step 1. Paste adhesive at back of the device, see Figure 4-11.

Step 2. Paste the sensor on the unmovable part of the door or the window, and the

magnetic contact on the movable part of the door or the window. Between sensor and

magnetic contact should only be 2.5cm distance. When device installation is complete. See

Figure 4-12

Figure 4-11 Figure 4-12