Datasheet

www.technaxx.de
WiFi Smart Alarm System Starter Kit TX-84
WiFi Basis Station with PIR Detection Sensor, Door/Window
Contact & Remote Control
• Modularly expandable, connect max. 32 detectors
• Connection with up to 6 remote controls
• Push message at alarm release & emergency call
• Two-way communication between detector & basis
station
• Transmission distance from detectors to basis station
~200m open areas
• Adjustable alarm tone volume (mute, silent, loud)
• Easy installation & conguration via Smartphone with My
Secure Pro APP (iOS & Android)
• Activate & deactivate of the alarm system via remote
control or APP
• 5V/2A power supply via USB power adapter
Technical specications basis station TX-84:
• Embedded: Micro Controller & Linux OS
• 128-Bit AES encryption algorithm
• Wireless connections: up to 32 detectors (868MHz); up to 6
remote controls/transmission distance ~10m (open areas)
• Audio output: built-in loudspeaker (alarm tone only)
• WiFi protocol: IEEE 802.11b/g/n, distance ~25m
• Power supply (Micro USB): DC 5V/2A, max. 10W
• Working temperature: –10°C ~ +50°C
• Installation: wall mounting (indoor only)
• Weight / Dimensions: 96g / (L) 9.4x (W) 11.4 x (H) 1.8cm
Package Contents TX-84:
• WiFi basis station with 1x USB power adapter, 1x Micro USB cable,
3x screws, 3x dowels, 1x adhesive tape
• PIR detection sensor with 1x bracket (on the device), 4x screws, 4x
dowels, 1x CR123A battery
• Door and window contact with 4x screws, 4x dowels, 1x CR123A
battery, 2x adhesive tape
• Remote control with 1x CR2032 battery 3V (installed in device)
• CD
• User Manual
Funkübertragung mit 2.4GHz /
Wireless Transmission with 2.4GHz
Verbindung von max. 32
Sensoren /
Connection of max. 32
Detectors
Übertragungsreichweite von
Sensoren zur Basisstation /
Transmission Range from Detectors
to Basis Station
Zwei-Wege Kommunikation
zwischen Basisstation & Sensoren /
Two Way Communication between
Basis Station & Detectors
Push-Nachricht via APP bei
Ereignissen & Bewegungserkennung /
Push Message via APP at Events &
Motion Detection
SOS-Knopf für
Notruf-Push-Nachricht /
SOS Button for Emergency
Push Message
PIR-Bewegungserkennung /
PIR Motion Detection
Installation & Konguration
über My Secure Pro APP /
Installation & Settings via My
Secure Pro APP
Ein-/Ausschalten über
Fernbedienung oder APP /
On/O via Remote Control
or APP
WiFi-Übertragungsreichweite
vom Router zur Basistation /
WiFi transmission from Router
to Basis Station
Article-No. 4689