User manual

9
Door Sensor: You can install a door sensor and connect it with the TX-82. The function is
to get an alarm when door is not closed. See chapter 6.1.2 A&C Manager “Door Sensor
Check Time”. Connect to GND and Feedback
Unlock button: You can install an unlock button on the inside of the house. By pressing
manual unlock button you can exit. Connect to GND and Unlock.
485 Device: Developer Interface, no use for customer.
4.4 Device Installation * Warnings !
Avoid installation in poor environment, such as condensation, high temperature, oil stain,
dust, corrosion or direct sunlight. Project installation and debugging must be done by
professionals. Please do not open the device in case of failure.
4.4.1 Screw
For installation, please use screw according to chart 4-2.
Component Name Illustration Quantity
M4x30 screw 2
Chart 4-2
4.4.2 Installation Step
Figure4-3