User manual

4.1.4 Restore Backup

Restore RFID (NFC) Info: If you encounter abnormality with card info or accidently restore

default settings, you can restore card info with this function.

Restore ISM Info: If ISM info is mistakenly changed, you can restore ISM info with this

function. Note: Every half hour, SVD automatically saves card and ISM info in the system. If

you want to restore card and/or ISM info, you must restore within half hour after your last

operation that change these info. Please refer to chapter 6.1.5 Config Manager.

4.1.5 Vandal Proof

There is one channel of vandal proof which will generate alarm sound and report via

Push-Notification to the My Secure Pro App via push notification (or MGT centre) once SVD

is forced to leave the wall.

4.2 Insert MicroSD card

First power off the “TX-82”. Insert the MicroSD card (max.32GB) (first format MicroSD card

to FAT32 with your PC.) After that you find 4 screws on the backside of the TX-82. Remove

them and open the device. On the right top corner there you have to insert the MicroSD

card. Close the device again when you are finished.

Note: The files stored on the MicroSD card can only be watched by removing the card from

the TX-82. Insert the MicroSD card into a computer.

Important: If you change the MicroSD while the device is working. The MicroSD card

would not be recognized. You have to reboot the device via the Web interface (Logout 

Reboot device) or turn the device off and on again

Open the MicroSD card slot

Close and lock the MicroSD card

slot