User manual

8. Your Smartphone will use the WIFI connection you are currently connected to. Insert the

password of your WIFI router like seen in figure 9-3.

9. Press “Next” button.

10. System auto configure (wait). Figure 9-3

11. If failed, then click “try again” or repeat the above steps.

12. All configurations are saved automatically, when correct. See figure 9-3.

13. Press “Start Live preview”. See figure 9-3.

Figure 9-3

9.1.2 P2P configuration / LAN connection

This option can only be used when the camera is already connected to the LAN or

connected to the WiFi.

1. Press on the button and scan the QR-Code of the device. See figure 9-4

2. Name the device.

3. Username and Password are default (admin/admin).

Important: We recommend changing the username and password after first installation!

Only possible via the WEB interface! If login data has be changed it must be changed in the

My Secure Pro APP also.

4. Push notification should be enabled to get information about call or vandalism.

5. Press to save: