User manual

31
Tip: To add the Doorphone to your Smartphone when it is already configured use P2P. See
chapter 9.1.2 P2P configuration.
Figure 9-1
1. Choose WiFi configuration.
2. Interface display: Name, SN (QR code), username, password, push notifications, and
Audio Only. See Figure 9-2.
3. Select a device name and enter it.
4. Click , scan QR code (on device rear side) and the picture will be like Figure 9-2
5. Enter username and password (Default: Username: admin; Password: admin).
Important: We recommend changing the username and password after first installation!
6. Push notification should be enabled to get information about call or vandalism.
7. Press “Next” button
Figure 9-2