User manual

6.6.3 Modify User

Step 1. Select user who you want to modify his/her password, click . See figure 6-16.

Figure 6-16

Step 2. Check Change Password box. System shows Old Password, New Password and

Confirm Password.

Step 3. Configure interface parameter.

Step 4. Click OK, for saving.

Note: For your own safety we suggest to change the standard password of the Admin

account immediately! Only possible in the WEB interface. If login data has changed it must

be changed in the My Secure Pro APP also.

6.7 IPC (Only usable with additional ISM)

If the ISM has configured with IPC info, you can view IPC video image via corresponding

ISM. It supports up to 20 IP Cameras.

You can go to System Config  IPC info interface, view and modify all IPC info.

Tip: Set the IPC information on the ISM (TX-89 7“ monitor). There are more setting options

available.

Step 1. Select System Config  IPC info.

Step 2. Click .

Modify IPC info. See figure 6-17.

Figure 6-17

Step 3. Refer to chart 6-12 below.

Parameter Note

IPC Name IPC name.

IP Address IP address of IPC.

Username

Password

Step 4. Click .