User manual

24
6.5 Video Set
6.5.1 Video Set
You can go to System Config  Video Set interface to set video and audio.
Step 1. Select System Config Video Set.
Step 2. Adjust video parameter. See figure 6-12.
Note: If you cannot see video in window, install the required plug-in first.
Figure 6-12
Parameter Note
Video Format
Adjust video resolution, includes 720P, WVGA and D1.
 720P: 1280×720.
 WVGA: 800×480.
 D1: 720×576.
Frame Rate Adjust video frame rate to be 3, 25 and 30.
Main Format
Bit Rate
According to actual device input network, select bit rate
to be 256Kbps, 512Kbps, 1Mbps, 2Mbps and 3Mbps.
Video Format
Adjust video resolution to be WVGA, D1 and QVGA.
 WVGA: 800×480.
 D1: 720×576.
 QVGA: 320×240.
Frame Rate
Adjust video frame rate to be 3, 25 and 30.
Extra Format
Bit Rate
According to actual device input network, select bit rate
to be 256Kbps, 512Kbps, 1Mbps, 2Mbps and 3Mbps.
Brightness
Adjust video brightness, recommended value is 40～60,
range is 0
～100.