User manual

21
6.3.3 View Card Info
Card authorization you can find in chapter 6.1.2 A&C Manager.
Click to view all authorized card under the ISM. See chart 6-8.
Parameter Note
Card ID
Card Number
Username
Show RFID (NFC) number, username and ISM room no.
Main Card
Check “main card” box, set this RFID (NFC) to be main card. Note: Main
card has card authorization function, and this device does not support.
Report Loss
When RFID (NFC) is lost, click to report loss. Lost RFID (NFC) cannot
unlock door.
Modify
Click ，you can modify username under this RFID (NFC).
Delete
Click , you can delete this RFID (NFC).
Chart 6-8
6.4 Network Config
6.4.1 TCP/IP:
Go to System Config  Network Config  TCP/IP, see figure 6-9. You can set local IP
network parameter.
Step 1: Select System Config  Network  TCP/IP.
Step 2: Set local IP address, subnet mask and default gateway (6-9).
Figure 6-9
Step 3: Click .
After you have modified IP address, WEB page will reboot and go to the new IP address
page.