User manual

Parameter Note

Group Call Check “Group Call” box to call all ISMs, in this room.

MGT Center IP

Address

Center

MGT Port No.

Enter IP address and port no. of MGT center (PC with My Secure

Pro PC Client installed), check “Register to MGT center” box.

Important: Don’t change the port!

Call VTS Time Set period of call button on device to call MGT center.

Call VTS or Not Check “Call VTS or Not” box, to enable call MGT center function

via button on TX-82 during the set period instead of calling ISM.

Note: If you check the box here you maybe will not receive push

notifications on your mobile.

Default Click “Default”, to restore setting in this page to default.

Refresh Click “Refresh” to refresh this page.

Chart 6-6

6.3 Indoor Manager (Only usable with additional ISM)

Important: For standalone use of TX-82 you have to add an ISM, to generate a room no.

Note: ISM is an additional product that can be used to expand the function of TX-82.

Settings on chapter 6.3 Indoor Manager can only set with an ISM in your network.

In Indoor Manager interface, you can add, delete and modify ISM.

6.3.1 Add ISM (Important for TX-82 stand alone)

TX-82 only supports to add 1 ISM. Any new ISM will replace current ISM.

Step 1. In tab, select System Config  Indoor Manager  Digital Indoor Station Manager.

Step 2. Click .

Step 3. Fill in digital ISM basic info. See figure 6-7.

Note: Parameters with * are mandatory.

Fig 6-7