User manual

6.2 LAN Config (Only usable with additional ISM)

Note: ISM is an additional product that can be used to expand the function of TX-82.

Settings on chapter 6.2 LAN Config can only set with ISM and TX-82 in the same network.

Go to System Config  LAN Config  LAN Config, see figure 6-6. Here you can register

TX-82 to MGT center. Enter IP of your PC the My Secure Pro PC Client Software (see

chapter 11 My Secure Pro PC Client) is installed on. This PC will be the MGT center. Set

the time to call MGT center instead of ISM.

Note: For TX-82 as standalone set the time from 00:00 to 23:59, in which you are at home.

Than the TX-82 will always call the PC (My Secure Pro PC Client) when PC is powered on

and My Secure Pro Client is running.

Attention: You will not receive any Push-Notifications within the period of time!

Figure 6-6

Parameter Note

Building No.

Building Unit No.

Set ISM building no. and unit no.

Doorphone No. Default is 6901. If you connect more than one TX-82, use for the

first device 6901, for the second 6902, for the third 6903 and so

on.

Max Extension Index 1 ISM supports 5 extensions, and fill in extension according to

actual condition (9901-1, 9901-2, etc.).

Warning: When number of extension changes, you shall reboot

ISM, and configure ISM again.