User manual

14
Check Door Sensor
Signal Before Lock
to enable it. When door remains unlocked over set door sensor
check time, it alarms via push notification.
Auto Snapshot Select Enable, when you swipe card, it auto snapshot two
pictures and upload them to FTP or MicroSD card.
Upload Unlock Record Select Enable, upload unlock record. You can view in Info
Search  Unlock Record  Unlock Record. Who and when has
entered/unlocked the door.
Issue Card Activate RFID (NFC) of the SVD so user can swipe the RFID
(NFC) to unlock door; supports up to 1000 RFID (NFC)s. Please
refer to Issue card description below to activate.
Default Only restore A&C Manager page to default settings.
Refresh Click Refresh to refresh current interface.
Chart 6-2
Issue Card
Note: Before you add RFID (NFC), you have to add under System Config  Indoor
Manager the Digital Indoor Station Manager first, refer to chapter 6.3.1 Add ISM. This is to
generate a room no.. Without room no. it is not possible to set RFID (NFC)s.
Step 1. Select System Config  Local Config  A&C Manager.
Step 2. Click Issue Card, and place RFID (NFC) close to card swiping area on TX-82.
System shows card no. Info interface.
Step 3. Enter the RFID (NFC)'s corresponding username and room no. (of ISM), click OK.
The room No. is 9901 by default. The User Name can be choosen freely.
Note: Fill in room no. Which must match info on Digital Indoor Station Manager.
Step 4. Click Confirm Issue to complete card issuing.
Now you can go to System Config  Indoor Manager  Digital Indoor Station Manager,
click to view the connected RFID (NFC)s.
Note: To delete an RFID (NFC) go to System Config  Indoor Manager  Digital Indoor
Station Manager  Card No. Info. See chapter 6.3.3 View Card Info.
For example: Use RFID (NFC) of your Smartphone (Only Android devices with RFID (NFC)
function). Activate the RFID (NFC) option on your Smartphone and follow the steps above.
Important: If you do not use the included RFID (NFC)s we cannot ensure that the
encryption is safe.