User manual

13
Parameter Note
Sensor Set compensation light threshold. Light compensation will automatically
turn on during monitoring, calling, or connecting status if there is not
enough light in environment. The greater the value, the better the
sensitivity of the fill light.
Storage Point Storage path of record and picture, you can select FTP or SD Card.
Please refer to chapter 6.4.2 for FTP setup.
Device Type Display device type. Now it is “Doorphone TX-82”.
Reboot Date On the set day of the week, device will automatically reboot. Default is
Tuesday (2:00 a.m.).
Version Info Display device version info.
Dial Rule There are serial and non-serial.
Language There are multiple languages available
Default Only restore current Local Config page to default settings.
Refresh Click Refresh to refresh current interface.
OK Click OK to save.
Chart 6-1
6.1.2 A&C Manager
A&C Manager mainly controls unlock responding interval time, unlock period and door
sensor check time. Go to System Config  Local Config  A&C Manager (6-2).
Figure 6-2
Parameter Note
Unlock Responding
Interval
The interval between current unlock and next one, unit is
second.
Unlock Period Period door remains unlocked, unit is second.
Door Sensor Check
Time
If you want to use a door sensor, check the box ”Check Door
Sensor Signal Before Lock”, and set “Door Sensor Check Time”