User manual

ManualsBrandsTECHNAXX ManualsSurveillance CamerasCamouflaged CCTV camera 1920 x 1080 pix

Technaxx

* User Manual

Power Bank 6000mAh with FullHD Camera TX-92

The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom

“Konformitätserklärung”). Before using the device the first time, read the user manual

carefully.

This device has a rechargeable battery. It must be fully charged before first use.

NOTE: Charge the battery of the device every 2–3 month if it is not used!

Service phone No. for technical support: 01805 012643 (14 cent/minute from German

fixed-line and 42 cent/minute from mobile networks).

Free Email: support@technaxx.de

Keep this user manual for future reference or product sharing carefully. Do the same with

the original accessories for this product. In case of warranty, please contact the dealer or

the store where you bought this product. * Warranty 2 years

Features

 Charging the most mobile devices (e.g. Smartphone, tablet PC, eBook reader, etc.)

Rechargeable portable 6000mAh lithium ion battery (type 18650) 3.7V/22.2Wh  FullHD

video recording with 1/4" CMOS camera sensor 2MP & sound  USB output 5V/1.5A for

charging external digital devices  MicroSD(HC) card slot up to 32GB  Infrared night

vision up to 2m  Backup power on the go, ideal for travelling  Built-in protection against

overcurrent, short circuit, overload, overcharge, overvoltage  Charging status is shown

by 4 LEDs Easy handling via remote control

Technical specifications Power Bank

Built-in rechargeable 6000mAh lithium ion battery

Battery type 18650 3.7V 22.2Wh

Power supply input (Micro USB) DC 5V/1A power adapter** (**not included)

Power supply output (USB) DC 5V/1.5A

Charging time

~7–9 hours without simultaneous recording

~15 hours with simultaneous recording

Connections

1x Micro USB 5V/2A (for power bank charging)

1x USB 5V/1.5A (for charging external device)

1x MicroSD(HC) card slot (max. 32GB)

Only video DC 3.7V/160mA

Power consumption

Only IR DC 3.7V/100mA

Sound recording Built-in non-visible microphone

Operating systems Windows 7 / 8 / 8.1 / 10 / MacOS

Working temperature –5°C up to +50°C

Weight / Dimensions 187g / (L) 13.8 x (W) 6.2 x (H) 2.1cm

Summary of content (5 pages)

PAGE 1
Technaxx® * User Manual Power Bank 6000mAh with FullHD Camera TX-92 The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using the device the first time, read the user manual carefully. This device has a rechargeable battery. It must be fully charged before first use. NOTE: Charge the battery of the device every 2–3 month if it is not used! Service phone No.
PAGE 2
Technical specifications Video Camera Camera sensor Viewing angle Video resolution Photo resolution IR night vision Continuous recording time External storage 1/4” CMOS, 2MP, 1280x720 60° horizontal 1920x1080 AVI format @ 30fps No photo function ~ 2m ~28 hours (only video function without IR) MicroSD(HC) cards up to 32GB (up to Class 6) [has no internal storage] Package Contents: Power Bank 6000mAh with FullHD camera TX-92, Micro USB to USB charging cable, Remote Control with button cell battery (CR2032),
PAGE 3
Charge the Power Bank fully before use (~ 7–9 hours) Connect the Micro USB port of the charging cable* (*included) to the Power Bank. Then connect the USB port of the charging cable to the USB port of a AC adapter** (**not included) or to a PC/Notebook (see right picture). During charging the RED LED is blinking. The number of lighting of the RED LEDs is depending on the amount of power in the power bank.
PAGE 4
Key (K1) functions and indicator LEDs description Video recording: Long press K1 button, BLUE LED L1&L2 blink 3 times and turn off, it starts recording videos. Save videos: Short press K1, BLUE LED L1&L2 steady on. After 1 minute without any operation the Power Bank will automatically shutdown. Note: Maximum file length of video recording is 3 minutes, after that a new file is created. Supports loop recording, when the memory card is full, it will remove an old file and add a new file.
PAGE 5
Connect the other end of the USB cable to the other device which you want to charge (e.g. Smartphone). The charging process will start automatically. When the Power Bank has no output, you have to charge it immediately. During charging process the RED LED is flashing. The number of lighting RED LEDs is depending on the amount of power in the Power Bank left.